AC to DC In-Studio Power Supply Converters
AC to DC Adapters for Videography, Still Photography and Other Electronic Devices
IDEAL FOR ALL YOUR IN-STUDIO POWER NEEDS: The Power Supply PS65W has a 65W 13.8V DC output and uses one female 4 pin XLR connector to hook up to the camcorder or video light units that use a XLR connector. The Power Supply PS 150W is a 150W 13.8V DC output and uses 2 female 4 pin XLR connectors and a DC power source. The Power Supply PS150W has a DC Power supply source connector, but is not included in the PS65W.
Camcorder and video units consume about 40 watts or more, which is much greater than your laptop (20 watts). Thus, when the power supply is used with the Camcorder and video lighting, the converter can get hot converting this energy from AC to DC. Our Power Supply units, the parts in our units are big and are designed to handle this generated heat that is created. It can easily expel this heat. Thus, the Power Supply PS65W and PS150W are designed to handle your camcorder and video lighting units and can convert AC into DC for 24 hours. There is a rugged metal casing in both the PS65W and PS150W units which are designed to allow the expelling of heat (as mentioned above). A handle on each of our units provide easy carrying and handling.
These units are specifically designed for professional videographers, photographers, video lighting, film studio use and for anyone wanting a professional level usage.
AC-DC Power Supply PS65W
Delivering 65 watts of DC power from regular AC outlets
The Power Supply PS65W has a 65W, 13.8V DC output and uses one female 4 pin XLR connector to hook up to a camcorder or video light units that use a XLR connector. The PS65W comes with a single female 4 pin XLR connector for one AC to DC conversion.
Input Voltage
DC Output Capacity
DC Output Connector
Dimensions (WxHxD)
Weight
Internal Safety Feature
Universal AC Input Voltage
100 ~ 240VAC, 50/60HZ power
65W max. (4.7A 13.8V)
4-pin XLR female connector: pin 1 – negative,
pin 4 -positive
3.9” x 2.4” x 7.9” (100mm x 60mm x 200mm)
~2 pounds (0.9 kg)
Automatic shutdown protection from overload damage should an excessive load be drawn.
Allows worldwide operation
NOTE: The 4 pin XLR power supply connector cable is sold separately. All specifications are listed at nominal or typical values. Specifications, data and features on the Timbre and Luces Power Supply Units may change without notice.
AC-DC Power Supply PS150W
Delivering 150 watts of DC power from regular AC outlets
The Power Supply PS 150W is a 150W, 13.8V DC output and uses 2 female 4 pin XLR connectors and DC power source. If you don’t have access to an electrical outlet, but still want to connect up two units to your PS150W power supply, the PS150W comes with a male 4 pin XLR connector input which allows your power supply to come from any power battery pack, including any of our Shoulder Power Pack models. In that way, you can still operate two camcorders or lights and not just one. This system is called UPS (uninterruptible power supply).
Input Voltage
DC Output Capacity
DC Output Connector
DC Input Connector
Dimensions (WxHxD)
Weight
Internal Safety Feature
UPS
Universal AC Input Voltage
100 ~ 240VAC, 50/60HZ power
150W max. (4.7A 13.8V)
4-pin XLR female connector: pin 1 – negative,
pin 4 -positive
4-pin XLR male connector
5.5” x 2.6” x 9.8” (140mm x 65mm x 250mm)
~3 pounds (1.2 kg)
Automatic shutdown protection from overload damage should an excessive load be drawn.
Uninterruptible Power Supply
Allows worldwide operation
NOTE: The 4 pin XLR power supply connector cable is sold separately. All specifications are listed at nominal or typical values. Specifications, data and features on the Timbre and Luces Power Supply Units may change without notice.
REQUEST A PRODUCT DEMONSTRATION:
Sales, Service and Support: 909-367-9728
Timbre & Luces USA LLC
664 W. Glenoaks Boulevard, Suite A, Glendale, California 91202
Mobile: 909-367-9728
Established October 2016. Copyright © 2015-2017 Timbre & Luces USA LLC. All Rights Reserved. TIMBRE & LUCES, KENWELL and their logos are trademarks and service marks owned by Timbre & Luces USA, LLC. Kenwell products are manufactured for home use by Timbre & Luces USA LLC. Unauthorized use of text and images from this site is prohibited. All other trademarks on this site are the property of their respective owners. Site design and maintenance by www.DesignStrategies.com.
